Wing Pulley

Wing Pulley usually is installed at the position of tail pulley, tension take-up pulley or snub pulley，Its function is to remove the material stuck to the conveyor belt, The removed material will fall down from the inner cone surface of the pulley.

CONTACT NOW PDF DOWNLOAD

Details

Tags

Detail Description

The role of wing pulley is to clean the slag or stuck material.If the stuck material isn’t cleaned in time,which will stick to the rollers to decrease the lifetime of the rollers and affect the steady operation of the conveyor.

The structural design of wing pulley is unique . The outer circumference of the pulley is metal scrapers that can clean the material. The inside of the scraper has a slope extending to both ends, the stuck material will be discharged outside the conveyor belt. The connection between the drum and the shaft can be a key block or XTB expansion sleeve .

The pulley drum is welded by automatic welding equipment to ensure high welding quality and high welding strength . The drum is annealed at medium temperature, the residual stress is small, and the service life is long.

Product Parameters

Parameters for Belt Conveyor Wing Pulley
Pulley Type	Belt Width (mm)	Outside Diameter (mm)	Length (mm)
Non-driving pulley	500	250~500	The length of the drum is greater than the width of the belt 150-200mm
	650	250~630
	800	250~630
	1000	250~630
	1200	250~800
	Specifications can be customized according to requirements